Hydraulic Breather Filter Caps

17 products

Hydraulic breather filter caps provide dual protection, allowing air to flow into the system while filtering out contaminants, ensuring clean hydraulic fluid.

Use our Cross Reference or Part Finder Tool to find filters for your machinery.

Oil filler and air breather filler caps

Subcategories

  • TA - Metal oil filler and breather filler caps
    TA - Metal oil filler...
    Temperature resistance -25°C to 100°C
    Volume flow 200 L/min at 10 µm / ?p: 0.02 bar
    Chromed cover with NBR seal and bayonet closure –excl. valve, excl. safety chain
    alternative: G ¼"thread
    Resin-impregnated cellulose ventilation filter 10 µm or 40 µm
    Galvanized 3-hole flange / galvanized screws
    Cork seals (compatible with mineral oils to ISO 2943, emulsions containing water, synthetic fluids and water containing glycol)
    Galvanized strainer, tank installation depth 64 mm 
    TA ..46 Series and TA ..80 Series
    9100022_L_2.jpgcategory_280925.jpg?time=1535110187 
    Temperature resistance -25°C to 100°C
    Volume flow 550 L/min at 10 µm / ?p: 0.02 bar
    Chromed cover, bayonet closure and safety chain – excl. valve
    Optional locking
    Alternative: G ¾"thread
    Resin-impregnated cellulose ventilation filter 10 µm or 40 µm
    Galvanized 6-hole flange/ galvanized screws
    NBR or cork seals (compatible with mineral oils to ISO 2943, emulsions containing water, synthetic fluids and water containing glycol)
    Galvanized strainer, tank installation L: 80 mm or 150 mm 
  • TAP - Nylon filler and breather filler caps
    TAP - Nylon filler and...
    TAP 90 Series
    9100073_L_2.jpg  9100073_L_1.jpg
    Temperature resistance -25°C to100°C
    Volume flow 550 L/min at10 µm / ?p: 0.02 bar
    Nylon cover with NBR O-ring – thread 1¼" –valve 0.3 bar
    Alternative: M52x2 thread, excl. valve
    Resin-impregnated cellulose ventilation filter 3 µm or 10 µm
    Nylon 6-hole flange / galvanized screws
    NBR seal (compatible with mineral oils to ISO 2943, emulsions containing water, synthetic fluids and water containing glycol)
    Galvanized strainer, tank installation depth L: 120 mm 
    SF Item Type Note
    TAP 90G3L10AM1 Filling filter G 1 1/4" thread - NBR seal - valve 0.3 bar - filter fineness 10 µm - cover Ø 91 mm
    TAP 90G10A0000P01 Filling filter M52x2 thread - NBR seal - without valve - filter fineness 10 µm - cover Ø 91 mm
    TAP 90FL03AM10C120 Filling filter cover: M52x2 thread - NBR seal - valve 0.3 bar - filter fineness 3 µm - 6-hole flange with NBR seal - tank installation depth 120 mm

Active filters