loading spinner

Microfilter

SF Microfilters

Subcategories

  • Serie SMT - Tube
    Vacuum Shaped Borosilicate Glass Microfibre 
    Functionality: Surface filtration 
    Application: Gas and liquid 
    filtration Available in 5 
    grades Filter fines from 0.3 to 25 micron 
    High temperature resistant and high chemical resistance 
    On request: special mass and design of specific applications 
    Applications: gas and liquid analysis, emission monitoring and analysis , Sample analysis, gas and chemical filtration, instrumentation, protection of laboratory equipment and special instruments
    filtration degree A B C D e
    Purity (air and gas at 0.3 micron) 99.9998% 99.9998% 99.99% 99.5% 95%
    Purity (liquids at 98%) 0.3 μm 0.9 μm 2 μm 8 μm 25 μm
    Pressure loss? P - filter change 400 mbar (6 psi)
    temperature range -40 ° C to 150 ° C
  • Series SMC -...
    Vacuum moulded Borosilicate glass microfibre
    Complete depth filtration of oil, water and solids
    Dual layer construction to aid coalescence of liquids and oil aerosols
    Manufactured in 4 efficiency grades
    0.9 to 25 micron filtration efficiency
    High temperature tolerance and broad chemical resistance
    On enquiry: special sizes and specific requirement
    Applications: gas and liquid analysis, emissions monitoring and analysis, sample analysis gas and chemical filtration, instrumentation filtration, laboratory point of use protection and critical instrumentation protection 
    Grade B C D E
    Efficiency, air and gas at 0.3 micron 99,9998% 99,99% 99,5% 95%
    Efficiency, liquid 98% at 0,9 µm 2 µm 8 µm 25 µm
    Recommended filter change ?p 400 mbar (6 psi)
    Temperature range -40°C to 150°C
  • Series SMI - In-line

    Vacuum moulded Borosilicate glass microfibre filter cartridges
    Standard housing Nylon (clear), optional: Polypropylene
    Surface filtration for removal
    Single moulded construction for use in gas and liquid applications
    Manufactured in 5 efficiency grades
    0.3 to 25 micron filtration efficiency
    On enquiry: specific requirement
    Applications: gas and liquid analysis, emissions monitoring and analysis, sample analysis, gas and chemical filtration, instrumentation filtration, laboratory point of use protection and critical instrumentation protection

    category_280860.jpg?time=1533650641

    Filter housing Nylon (clear) Polypropylene
    Maximum pressure 9 barg (130 psig) atmospheric
    Pressure loss (clean and dry) 100 mbar (1,5 psi)
    Pressure loss replacement indicator ?p 400 mbar (6 psi)
    Temperature range -40°C - 60°C 0°C - 65°C
    Internal volume 11cm³



    Grade A B C D E
    Efficiency, air and gas at 0,3 micron 99,9998% 99,9998% 99,99% 99,5% 95%
    Air flow rate in Nm³/h 0,9 1,3 2,6 4,3 5,0
    Air flow rate in SCFM 0,5 0,75 1,5 2,5 2,9
    Efficiency, liquid 98% at 0,3 µm 0,9 µm 2 µm 8 µm 25 µm
    Water flow rate l/h at 100 mbar pressure drop 6 14 28 55 65

    SF Article Type Note
    SMI 502A Compressed air filter A = 99,9998% / 0,3 µm
    SMI 502B Compressed air filter B = 99,9998% / 0,9 µm
    SMI 502C Compressed air filter C = 99,99% / 2 µm
    SMI 502D Compressed air filter D = 99,5% / 8 µm
    SMI 502E Compressed air filter E = 95% / 25 µm

No products available yet

Stay tuned! More products will be shown here as they are added.

info_icon