S-CLP0032 series - nominal flow rate 32 Nm³/h - thread G 1/4"
3 products
S-CLP0032 series meet the ISO 8573-1:2010 and PED 97/23/EG
Any residual internal pressure is discharged through the safety device
Automatic condensate drain with three functions: activated by compressed air during normal operation, semi-automatic : operates under no pressure condition, manual
The surface treatment of the interior and exterior of the housing assures excellent corrosion resistance
Only 5 cm of clearance under the filter bowl is required during element replacement
Colour code: the element grade is clearly identified by the use of different coloured foam sleeves
An O-ring seal ensures positive element location and eliminates the possibility of bypass
Any residual internal pressure is discharged through the safety device
Automatic condensate drain with three functions: activated by compressed air during normal operation, semi-automatic : operates under no pressure condition, manual
The surface treatment of the interior and exterior of the housing assures excellent corrosion resistance
Only 5 cm of clearance under the filter bowl is required during element replacement
Colour code: the element grade is clearly identified by the use of different coloured foam sleeves
An O-ring seal ensures positive element location and eliminates the possibility of bypass
S-CLP0032 Serie
| Housing | Aluminium |
| Thread | G ¼" |
| Flow rate (at 7 bar) | 32 Nm³/h |
| Maximum pressure | 16 bar |
| Maximum temperature | 80°C |
| Dimension mm | A94, B 211, D21 |
| Version |
with automatic inner condensate drain , optional with differential gauge |
| Grade of filtration | see frame below |
