HEPA & ULPA filter series

HEPA & ULPA filter series

Subcategories

  • V-292 series Filter...

    HEPA & ULPA filters V-292 series Filter classes E10 - U15

    An outstanding feature of the SF-V292 series is the V-shaped arrangement of the minipleated glass fibre papers in the housing. The housings have a depth of 292 millimetres. Depending on the housing size and filter class, the large filter surfaces allow volumetric flows of up to 4000 m³/h with minor pressure drops. The filter packs are secured in the housing with a dual-component adhesive all round, and the arrangement protects them against damage. The HEPA filters undergo a leakage test in accordance with EN 1822 and are supplied together with a test report.
    Product properties:

    Micro glass fibre paper 
    Moisture resistance up to 100% rel. hum. 
    Temperature resistance (standard) up to maximum 70°C 
    Recommended final pressure drop 600 Pa

    Classification of HEPA filters in acc. with EN 1822-1:2009 (extract)

    Filter class Integral value Integral value Local value Local value
      Filtration efficiency Permeability Filtration efficiency Permeability
    E10* 85% 15% - -
    E11* 95% 5% - -
    E12* 99,5% 0,5% - -
    H13* 99,95% 0,05% 99,75% 0,25%
    H14* 99,995% 0,005% 99,975% 0,025%
    U15* 99,9995% 0,0005% 99,9975% 0,0025%
    *EPA: Efficient Particulate Air Filter; HEPA: High Efficiency Particulate Air Filter; ULPA: Ultra Low Penetration Air Filter
    category_280951.jpg?time=1533651633
  • classes E10 - U15

    HEPA & ULPA filters Filter classes E10 - U15

    An outstanding feature of SF HEPA and ULPA filters are the high-quality glass fibre papers in every filter class. The filter media are minipleated and, thanks to this optimum pleat geometry, provide an even air flow combined with minor pressure drops. The HEPA filters are tested in accordance with EN 1822 and are supplied together with a test certificate. SF high efficiency filter panels with metal frames (optionally with grip protection) provide great safety against bacterial and fungal growth. SF HEPA filters with MDF frames (medium-density fibre panel) are non-corroding and simplify disposal, as they are produced without metal parts.
    Product properties: 

    Micro glass fibre paper, separator: hotmelt
    Moisture resistance up to 100% rel. hum.
    Temperature-resistant (standard) up to maximum 70°C
    Recommended final pressure drop 600 Pa
    Optional: Aluminium, MDF, galvanized steel plate frame
    Optional: Flat or foamed seal
    Optional: Grip protection on one or both sides
    On enquiry: Temperature-resistant up to 120°C with aluminium separators


    Classification of HEPA filters in acc. with EN 1822-1:2009 (extract):

    Filter class Integral value Integral value Local value Local value
      Filtration efficiency Permeability Filtration efficiency Permeability
    E10* 85% 15% - -
    E11* 95% 5% - -
    E12* 99,5% 0,5% - -
    H13* 99,95% 0,05% 99,75% 0,25%
    H14* 99,995% 0,005% 99,975% 0,025%
    U15* 99,9995% 0,0005% 99,9975% 0,0025%
    *EPA: Efficient Particulate Air Filter; HEPA: High Efficiency Particulate Air Filter; ULPA: Ultra Low Penetration Air Filter
    category_280952.jpg?time=1533651633

No products available yet

Stay tuned! More products will be shown here as they are added.